Built for hunters who don't have time to mess with cheap feeders. The Redneck 600 holds 600 pounds of corn or protein, throws feed in a full 30-yard pattern, and runs on a solar-charged battery, so your herd stays on a schedule. Fully welded steel hopper. Coon-proof spinner. Filled from the ground, no ladder needed.

Fill it once. Let it work.

The 600 LB Automatic Deer Feeder is built for the landowner who wants a feeder that works as hard as they do. 600 pounds of capacity, solar-powered so the battery stays topped off, and a heavy welded steel hopper that can take a beating from livestock, hogs, and the occasional bad weather day. Fill it once, set your timer, and let your herd do the rest.

Assembled in Lamar, Missouri, by American workers. Backed by a 5-year manufacturer's warranty.

See it in action

Why hunters pick the 600

Holds 600 lbs of corn or protein.
Enough capacity for long stretches between fills without the footprint of a larger gravity feeder.

Solar powered with a rugged 12V panel.
The aluminum-frame, tempered glass solar panel keeps the 8Ah battery charged for years of dependable use. No running back to the farm to swap batteries every few weeks.

Broadcasts feed up to 30 yards.
Adjustable directional throw and a coming-soon speed controller let you fine-tune coverage for the exact setup you're hunting.

Broadcast feeder or protein feeder. You pick.
The removable pull-out feed tray converts the feeder from a broadcast unit into a protein feeder in minutes. One feeder, two feeding strategies.

Fill it from the ground.
The low-profile hopper sits low enough to fill straight from a bag or bulk bin. No ladders, no back strain, no wasted time on setup day.

Fits in your truck or UTV bed.
At just 48 inches wide, the feeder slides into most pickup beds and UTV cargo boxes. Built-in tow hooks let you reposition it quickly when it's empty.

Eliminator Spinner Plate keeps varmints out of your hopper.
The spinner opens only during a feed cycle and locks closed when the motor stops, helping prevent raccoons, possums, and other varmints from accessing feed inside the hopper, reducing waste and keeping your feed where it belongs.

THE-TIMER control system.
The feeder runs on THE-TIMER, an industry-leading control unit backed by a 5-year manufacturer's warranty, direct from the manufacturer.

Redneck built. Redneck tough.

The hopper is welded from medium-gauge steel in a two-piece design. Leak-resistant. Built to stand up to cattle rubbing, hogs crashing into it, and the kind of weather that ruins cheap feeders. Other feeders in this capacity range are usually thin galvanized metal with crimped seams. They dent, warp, and rust out. This one is built to be the last feeder you buy.

600 LB Automatic Deer Feeder Specifications

Spec	Detail
Capacity	600 lbs
Empty weight	200 lbs
Base dimensions	48.5" x 49" at the widest point
Hopper dimensions	37" x 37"
Height	53" (floor to lid top)
Broadcast range	Up to 30-yard diameter
Power	12V solar panel, 8Ah lead acid battery
Control unit	THE-TIMER (industry-leading third-party timer)
Hopper construction	Medium-gauge welded steel, two-piece design
Feeding modes	Broadcast or protein (with removable tray)
Transport	Fits pickup and UTV beds, built-in tow hooks
Warranty	5-year manufacturer warranty

What's included

Redneck 600 lb feeder with welded steel hopper
12V solar panel with an aluminum frame and tempered glass
8Ah lead-acid battery
THE-TIMER control unit
Eliminator spinner plate
Removable pull-out feed tray (for protein conversion)
Built-in tow hooks

Warranty

The Redneck 600 comes with a 5-year manufacturer's warranty from Redneck Outdoor Products. THE-TIMER control unit is covered by a separate 5-year warranty handled directly by the timer manufacturer.

Frequently Asked Questions

How is this different from the 750 LB Fiberglass Gravity Deer Feeder?

The 750 is a gravity-fed feeder where deer eat directly from a trough at the base. This 600 is an automatic broadcast feeder. It throws feed on a timer in a 30-yard pattern, which is ideal for conditioning deer to a schedule, running a protein program, or covering a wider feeding area. Both feeders have their place. The 600 gives you control over when and how feed is distributed.

Can I use it as a protein feeder?

Yes. The removable pull-out feed tray converts the broadcast feeder into a protein feeder. A speed controller (coming soon) will help fine-tune throw distance for protein pellets, which behave differently from corn.

How long will 600 pounds of feed last?

It depends on your timer settings, herd size, and feed type. Most landowners running one to two short feed cycles per day on a moderate herd can stretch a full hopper across several weeks. The timer gives you full control over cycle duration and frequency.

Does the solar panel really keep it charged year-round?

Yes. The 12V aluminum-frame, tempered-glass panel is built for long-term outdoor use. The 8Ah lead acid battery is sized to hold a reliable charge even through cloudy stretches. This is not a throwaway trickle charger.

Will it keep raccoons out?

The Eliminator Spinner Plate is designed to lock shut when the motor is off. That means coons, possums, and other varmints can't spin the plate to dump feed when the feeder isn't cycling. This is one of the biggest differences between our feeder and cheaper options that leave the spinner exposed.

Can I move it by myself?

At 200 pounds empty and 48 inches wide, this feeder fits in most pickup and UTV beds. Built-in tow hooks let you drag or trailer it to a new spot when it's empty. Full, it's a two-person job or a tractor job.

Is it built in the USA?

Assembled in Lamar, Missouri by American workers at our employee-owned facility. Same crew, same standards, same pride that goes into every Redneck product.

Deer Feeders

750 LB Fiberglass Gravity Deer Feeder

T-Post Gravity Deer Feeder

Programmable Timed Dispenser

600 LB Automatic Deer Feeder